This three-piece O-Flute CNC Bit Set includes the most commonly used sizes for cutting plastics, acrylics, HDPE, and other soft materials. Perfect for makers who want clean, precise results with less melting and edge cleanup.
Includes:
(1) 1/4" O-Flute Bit – 1" Cutting Length
(1) 1/8" O-Flute Bit – 1/2" Cutting Length
(1) 1/16" O-Flute Bit - 3/8" Cutting Length
The single-flute design on both bits maximizes chip evacuation, keeps the tool running cool, and ensures crisp edges. Whether you're doing signage, templates, or small plastic parts, this set covers your bases with high-quality performance and reliability.
Feeds & Speeds Recommendation
Check the Photo in the listing for feedrate recommendations or watch this video here! Click to Watch Youtube Video
I like this kit, the included vectric file worked just fine for me. I had one small issue (on one side of the big black HDPE the black cut away to show the white - on the other side it didn't). I didn't panic and reset the zero a bit lower and cut again and all was well. I'm sure some of Ryan's videos where he demonstrates he's not perfect but continues on after a glitch helped me. Overall, this was an easier project than I anticipated and HDPE is fun to work with.
Decided to go with a 30 deg carving bit for more detail and use a black epoxy inlay. Came out really nice. Thanks to CIC for a great project. Keep them coming!
I submitted a prior review for the 250th file and clock kit. I just have to brag a little bit because I submitted the clock to the Twin Falls County Fair and won First Place and Best of Class for Fair Theme Woodworking!
Thank you CIC Workshop for helping develop the skills I needed (along with the files, materials, bits, and kits) to achieve this!
I love this BamX. I only wish they offered more choices and made the outside layers thicker. I have so many more ideas but I am limited because of the thickness of the outer layers. Even a reverse of the colors (light, dark, light).
I loaned a new Shapeoko 5.1 Pro CNC router to TekVenture Makerspace last winter, but only recently had time to start using it for some of my projects. One of the first has been thank you plaques for donors to Scouting America projects. I found that the BT275 - 3/4'' X 5/8" Bowl & Tray bit with - 1/4" Shank did a great job of making smooth, nicely shaped backgrounds for the artwork. The bit cuts very fast and very smooth. I usually do a light 320 grit sanding between bit changes to remove the faint path marks. But that is minimal. This bit saves a lot of time and make beautiful product.
It had a few blemishes voids in the wood I wanted to fill didn’t realize epoxy would spread so far with end grain didn’t care for that but other wise it turned out good
It cuts plastic like a hot knife through butter. I had to order one online in a pinch that was a dull dog and had to abandon the project when the CIC beast showed up! The next day.Note to future Greg when ordering bits order 2…
“ 1 is none, 2 is 1 theory”
Worked like a dream. Very true to flat and having the ability to change cutters versus purchasing a whole new bit every time allows for years of use from this one purchase. Well worth the money!
I bought this, for one I needed a new flattening bit for my surface board and second it was cheaper than a drum sander. I need to sell a few more boards before getting that sander. This bit did an awesome job. I used it to flatten my cutting board and it left a great finish. I think I could have went straight to 120grit and skip 80. I didn’t, but sanding with the 80 was much faster than before. If you need a flattening bit this is a great bit. I’m using it in a makita router for a spindle.
This was my first kit. The files were perfect, the instruction video walk me through every step of the process The results came out better than expected. I just ordered two flag kits. Am very happy with the results of the maze.
I and my customers love the domino game set. However some customers have asked if I have cribbage boards.
So I added to the outside of both halves a cribbage board protected with acrylic.
Thank you
Andy roff
These are truly the best bits I have used. I have used a lot of more expensive and brand-name bits, but these are hands down my favorite. THANK YOU, Ryan!
Thanks to Ryan's YouTube video on doing V Carve Inlays, I have done over 40 inlay projects using your 30 degree "V" carving bits.
This project below is a Floating Plaque that I just gifted to a local center that offers free services to cancer patients. It is held up by concealed magnets and anchored down at the bottom with fishing line.
As they are having a fund raising event I have also donated the Marble Maze game and the spalted sycamore end grain cutting board that I purchased from CIC
The Kin logo and the Welcome To Kin are V Carved Inlays and the Heart & Hands are regular Inlays. The white text is done with white wood filler.
Thanks again to Ryan for his great V Bits and for sharing a lot of CNC woodworking tips to us hobbyist.
Much Appreciated.
Mark Barr
I wanted to try my hand at something new and I ordered a 30 pack of mixed hardwood. The shipment was quick and the wood was perfect. Thanks again and I look forward to buying more.
