Skip to content

1/8'' x 3/4'' Downcut - 1/8'' Shank - DC1175

🔥 [COUNT] shoppers are looking at this right now
Save 17% Save 17%
Original price $29.99
Original price $29.99 - Original price $29.99
Original price $29.99
Current price $24.99
$24.99 - $24.99
Current price $24.99

Great for Profiling and cutting out small products and parts. It can be used for pocketing and corners with tight radiuses. I love to use this bit to cut out small parts because the down-cut part of the bit allows the chips to hold the part in place better when cutting. 

Recommended Feeds & Speeds 

  • Hobby CNC with Router - 50 IPM
  • Hobby CNC with Spindle - 80 IPM
  • Industrial CNC - 100 IPM
  • Cut Depth Per Pass - .125" 
  • RPM's - 18,000
  • Plunge Rate = 50% of Feedrate (ex: Feedrate=100 IPM, Plunge Rate=50 IPM)
  • These Feedrates are recommended starting points, each CNC is different and feedrates will vary.

Bit Info

  • Diameter: 1/8''
  • Rotation: Downcut
  • Cutting Height: 3/4''
  • Shank Size: 1/8''
  • Flutes: 2
  • Overall Length: 2''
  • Material: Solid Carbide
  • Part #: DC1175

Customer Reviews

Overall rating: 4.9 / 5 from 4531 reviews.

Customer photo review of 30 Deg V-Groove - 3-Flute - 1/4 Shank - VSC30

I used the 30 degree vbit as well as your hard maple panel to do this walnut inlay. The bit carved flawlessly in both woods. Definitely a plus to have quality wood and bits! I'll be back for more!

30 Deg V-Groove - 3-Flute - 1/4 Shank - VSC30

Customer photo review of Walnut Panel

Great looking product.

Walnut Panel

Customer photo review of Classic Game Box CNC Kit

Thanks for doing the hard work on this. The instructions were easy to follow and the toolpaths were perfect. Really enjoyed this one.

Classic Game Box CNC Kit

Customer photo review of Epoxy Christmas Ornament CNC Kit

CIC Workshop sold me the 1/2-inch thick, 12x12-inch, Walnut panels used for their Christmas ornaments kits. I purchased the panels only to make 2026 ornaments. Great customer service and the stand alone panels were a great price. Thank you, Tom

Epoxy Christmas Ornament CNC Kit

Customer photo review of Spoon & Spatula CNC Kit

Another amazing project! Files worked seamlessly with Carveco, too.

Spoon & Spatula CNC Kit

Customer photo review of Spoon & Spatula CNC Kit

Everyone loves these and the wife is pretty happy with hers too !

Spoon & Spatula CNC Kit

Customer photo review of Cherry Panel

The cherry was great. Only had one panel that was a little warped but still worked out. I did burn mess up a golden girl rougher. Still trying to figure out how that happened.

Cherry Panel

Customer photo review of Premium Cutting Board Feet - Brass/Stainless Steel/Copper

The Cutting board feet are the highest quality feet I have found. They are the correct size with true quality craftsmanship and design. If you are building higher-end cutting boards, these are an excellent selection.

Premium Cutting Board Feet - Brass/Stainless Steel/Copper

Customer photo review of Game Day Board CNC Kit

Hey, I’m still working on it. My first one will have a 49’ers logo on it. This is my first time using epoxy resin. Soooo, I made two sample logos, in a larger scale, so that I could get an idea of the setup, machining, and epoxy steps involved. I’ve included a picture of the finished emblems. I’ve also included a monitor shot of how my game board will look. Actually it’s for my son. I doctored up the drawing so that I could use an actual ellipse logo for the Niners. I’m really happy with the kit you sent. I even ordered two more. And yes, the logo pieces are on the small cutting board blank. That may be a later picture. Thank you!

Game Day Board CNC Kit

Customer photo review of Custom Inlay Builder (18"x12")

This is the second custom cutting I have made using your base and inlay kit. I also use your clamping vice.

Custom Inlay Builder (18"x12")

Customer photo review of Big Girl - 3/8" x 1.25" Downcut Rougher - 3/8 Shank

This rougher bit can EAT! The roughing bit made quick work of clearing the pocket of this charcuterie board. The bit flew through the cherry and let a smooth bottom surface that required very little sanding.

Big Girl - 3/8" x 1.25" Downcut Rougher - 3/8 Shank

Customer photo review of Game Day Board CNC Kit

I supervise the CNC shop in a local makerspace in Lowell, MA. l love making your products as examples to members of what they can do on the machines. This one will be given to a local charity for annual fundraiser. I've sent many a member to you for training and bits. Expect some requests for TBN-32s, I've been teaching 3d carves this week. (Oh, and everyone mentions the handwritten thank-you cards! I collect them now)

Game Day Board CNC Kit

Customer photo review of Custom Inlay Builder (18"x12")

Love this kit. It takes so much work off my plate. In a tiny shop it is so worth every penny!!

Custom Inlay Builder (18"x12")

Customer photo review of Wavy USA Flag CNC Kit

Love these kits. They make it so easy to get a great looking flag. 2 large and one small flag done. 2 small flags have roughing pass, stars carved and epoxied. Will carve towards the end of the week. People love these flags!

Wavy USA Flag CNC Kit

Customer photo review of Hard Maple Panel

This was my first project on my new Shapeoko 5.1 pro, love it!

Hard Maple Panel

Customer photo review of Wavy USA Flag CNC Kit

Absolutely love both the large flag and the small flag. Awesome job! I actually love all of your kits, bits and materials!

Wavy USA Flag CNC Kit

Customer photo review of BamX - Bourbon

A client wanted his and his wife’s name carved in a heart. I took it one step further (as always), I carved it in a tree for them. BamX is such a versatile material and the possibilities are endless.

BamX - Bourbon

Customer photo review of Osage Orange Inlay Plug  (18"x12")

First time I've had a chance to work with Osage Orange and it's great! Easy to cut and very little packing or chip-out. Nice wood - I'll definitely get more!

Osage Orange Inlay Plug (18"x12")

Customer photo review of V-Carve Inlay Bit Set

Impressive bits and the fact is I have ordered more bits since using them in the inlay project

V-Carve Inlay Bit Set

Customer photo review of 1/64 Radius - 6.2 Deg 3D Tapered Ballnose - 1/4" Shank - TBN1-64

The bit works great and I have been using it to produce some of Nik's work from Broinwood. I have recently received an order to produce two BBQ cutting boards for Christmas gifts for my client's sons. One son is in the Marine Corp and the other son is in the Navy. My Client (The father) was so excited to see the BBQ cutting board I have in my home and there was no hesitation to put in the order. Thank you!

1/64 Radius - 6.2 Deg 3D Tapered Ballnose - 1/4" Shank - TBN1-64

Customer photo review of Complete CNC Inlay Starter Kit (12"x9")

First let me start by saying how amazing the boards were in the kit. This was by far the most impressive design I’ve ever cut on my cnc and will definitely be making more inlays in the near future! Thanks to everyone at CIC for such a great experience.

Complete CNC Inlay Starter Kit (12"x9")

Customer photo review of Complete CNC Inlay Starter Kit (12"x9")

I just got my Altmill a couple of weeks ago and am so impressed with the items I bought from you. The inserted surfacing bit did awesome on the wasteboard and the inlay cutters worked great too. I made a couple of test inlays before trying the cutting board. All three of them came out flawless! The inlay press worked well also. I did put a few clamps on the sides to be sure it was all seated. The handwritten notes were a nice touch in my orders!!! Ordering things online is so impersonal and this made it so much better. Thanks!!!

Complete CNC Inlay Starter Kit (12"x9")