Customer Reviews
Overall rating: 4.9 / 5 from 4531 reviews.
Making gifts for Christmas
David M. 5/5 Verified
I used the 30 degree vbit as well as your hard maple panel to do this walnut inlay. The bit carved flawlessly in both woods. Definitely a plus to have quality wood and bits! I'll be back for more!
Jon W. 5/5 Verified
Great looking product.
Billy H. 5/5 Verified
Thanks for doing the hard work on this. The instructions were easy to follow and the toolpaths were perfect. Really enjoyed this one.
John H. 5/5 Verified
CIC Workshop sold me the 1/2-inch thick, 12x12-inch, Walnut panels used for their Christmas ornaments kits. I purchased the panels only to make 2026 ornaments. Great customer service and the stand alone panels were a great price. Thank you, Tom
Thomas M. 5/5 Verified
Another amazing project! Files worked seamlessly with Carveco, too.
C M. 5/5
I have typically used the traditional rubber feet for my boards. This time I ordered the CIC brass feet and they really look classy.
Bernard R. 5/5 Verified
They turned out amazing
Eric H. 5/5 Verified
Works great
Charles E. 4/5 Verified
ColorCore HDPE Plastic - Premium Multi-Layer Engravable Sheets
1/32 ball nose helped me to make this leash hook relief of my friend’s dogs
Jeffrey G. 5/5 Verified
1/32 Radius - 5.4 Deg 3D Tapered Ballnose - 1/4" Shank - TBN1-32
Great product and service! Just getting started making charcuterie boards w limited large equipment...these make it a piece of cake.
Jack D. 5/5 Verified
I am loving the bit , making lots of christmas trees.
Joe D. 5/5 Verified
Everyone loves these and the wife is pretty happy with hers too !
Lee M. 5/5
The cherry was great. Only had one panel that was a little warped but still worked out. I did burn mess up a golden girl rougher. Still trying to figure out how that happened.
Phil L. 5/5 Verified
The Cutting board feet are the highest quality feet I have found. They are the correct size with true quality craftsmanship and design. If you are building higher-end cutting boards, these are an excellent selection.
Bart A. 5/5 Verified
this bit is what you need to make juice grooves.
Mark M. 5/5 Verified
Hey, I’m still working on it. My first one will have a 49’ers logo on it. This is my first time using epoxy resin. Soooo, I made two sample logos, in a larger scale, so that I could get an idea of the setup, machining, and epoxy steps involved. I’ve included a picture of the finished emblems. I’ve also included a monitor shot of how my game board will look. Actually it’s for my son. I doctored up the drawing so that I could use an actual ellipse logo for the Niners. I’m really happy with the kit you sent. I even ordered two more. And yes, the logo pieces are on the small cutting board blank. That may be a later picture. Thank you!
Eddie P. 5/5 Verified
Turned out great! Wife and I will enjoy for years. Thank you CiC!
Robert J. 5/5 Verified
This is the second custom cutting I have made using your base and inlay kit. I also use your clamping vice.
Troy N. 5/5 Verified
This rougher bit can EAT! The roughing bit made quick work of clearing the pocket of this charcuterie board. The bit flew through the cherry and let a smooth bottom surface that required very little sanding.
Emmett P. 5/5 Verified
Worked out well thank you for the files
Darren S. 5/5 Verified
I supervise the CNC shop in a local makerspace in Lowell, MA. l love making your products as examples to members of what they can do on the machines. This one will be given to a local charity for annual fundraiser. I've sent many a member to you for training and bits. Expect some requests for TBN-32s, I've been teaching 3d carves this week. (Oh, and everyone mentions the handwritten thank-you cards! I collect them now)
Shawn A. 5/5 Verified
ColorCore is always our outdoor signage of choice!
Alan K. 5/5 Verified
ColorCore HDPE Plastic - Premium Multi-Layer Engravable Sheets
Came out amazing everybody loved it.
Michael W. 5/5 Verified
Excellent kit have bought several!
Michael W. 5/5 Verified
Love this kit. It takes so much work off my plate. In a tiny shop it is so worth every penny!!
Matt H. 5/5 Verified
Love these kits. They make it so easy to get a great looking flag. 2 large and one small flag done. 2 small flags have roughing pass, stars carved and epoxied. Will carve towards the end of the week. People love these flags!
Timothy T. 5/5 Verified
This was my first project on my new Shapeoko 5.1 pro, love it!
Ernesto B. 5/5 Verified
These kits are wonderful. Thanks
Jon R. 5/5 Verified
There’s a lot to be said for having the milling done for you. It’s like hiring someone without the hassle of hiring someone! Thanks Ryan!! You’re definitely on to something!
Ali W. 5/5 Verified
Maple (Hard) Hardwood Lumber Pack – 13/16" S4S – Free Shipping
Used it for an inlay and this 2.5D relief carving! So far so good!!
Connor H. 5/5 Verified
Absolutely love both the large flag and the small flag. Awesome job! I actually love all of your kits, bits and materials!
Kevin L. 5/5 Verified
A client wanted his and his wife’s name carved in a heart. I took it one step further (as always), I carved it in a tree for them. BamX is such a versatile material and the possibilities are endless.
Thomas M. 5/5 Verified
First time I've had a chance to work with Osage Orange and it's great! Easy to cut and very little packing or chip-out. Nice wood - I'll definitely get more!
Daniel L. 5/5 Verified
nice
Drayton F. 5/5 Verified
Impressive bits and the fact is I have ordered more bits since using them in the inlay project
Mike 5/5 Verified
The bit works great and I have been using it to produce some of Nik's work from Broinwood. I have recently received an order to produce two BBQ cutting boards for Christmas gifts for my client's sons. One son is in the Marine Corp and the other son is in the Navy. My Client (The father) was so excited to see the BBQ cutting board I have in my home and there was no hesitation to put in the order. Thank you!
Andy G. 5/5 Verified
1/64 Radius - 6.2 Deg 3D Tapered Ballnose - 1/4" Shank - TBN1-64
I think it came out great
Prescott S. 5/5 Verified
First let me start by saying how amazing the boards were in the kit. This was by far the most impressive design I’ve ever cut on my cnc and will definitely be making more inlays in the near future! Thanks to everyone at CIC for such a great experience.
Mike W. 5/5 Verified
I just got my Altmill a couple of weeks ago and am so impressed with the items I bought from you. The inserted surfacing bit did awesome on the wasteboard and the inlay cutters worked great too. I made a couple of test inlays before trying the cutting board. All three of them came out flawless! The inlay press worked well also. I did put a few clamps on the sides to be sure it was all seated. The handwritten notes were a nice touch in my orders!!! Ordering things online is so impersonal and this made it so much better. Thanks!!!
Eric D. 5/5 Verified